Tohnichi Multiple Unit AME
Application:• Angle multiple unit.Features:
• Angle type of ME model.
• Automatic torque converter enables the multiple unit stable and accurate tightening, high speed in provisional tightening and low speed for final tightening.
• Fluctuation of the air pressure will not affect the accuracy and repeatability of the tool.
• Easy to adjust torque value.
• When tightening is completed, the square drive reverses automatically, so it is easy to replace the socket.
• When the set torque reaches, the toggle mechanism operates instantly to stop the multiple unit. At the same time, the limit switch works to give signal that tightening is completed.
• Monitoring of tightening torque is available by using a torque sensor.
KANETEC Magnetic Dresser MDR
Application:• Used for dressing grinding wheels.
• The dresser can be held firmly on a powerful magnetic holder base. Set-up is easy.Features:• The magnetic force can be turned on and off with the lever to facilitate mounting and dismounting on the machine table. (For setting on a magnetic chuck, power OFF the chuck and power ON this Dresser.)
• The dresser can be mounted to any angle.
• The dresser mounting clamp can be secured to either the side or the top of the magnetic holder base. (The photo shows the clamp mounted on the side.)
KANETEC Magnetic Base Only MB
Application:• This base can be used widely as a magnetic force ON/OFF type magnetic base. It is designed small and is useful as a base for temporarily mounted legs of equipment, sensors and lasers by mounting a jig using tapped holes or by some additional machining.Features:• The base can be mounted and demounted easily using the select lever.
• Compact but powerful magnetic force.
• Dripproof and oilproof construction.
KANETEC Magnetic Lamp Stand ME
Application:• The magnetic lamp stands allow the magnet to be turned on and off quickly, and thus can easily be installed in any place, removed and relocated. These stands are most suitable for illumination of work areas on workbenches or machine tools.
• Thanks to a strong holding power by a small and light weight, yet strong magnet, these stands can easily be mounted not only on a horizontal face, but inclined face and vertical face. The flexible tube enables it to obtain an optimum illuminating angle.Features:• While the installation position is fixed by the attractive face, an illuminating direction can be changed freely.
•The protective guard protects the bulb from breakage when the lamp falls.
•The employment of an oil resistant power cord enables these stands to be used in various workplaces.
KANETEC Magnetic Holder Base MB P
Application:• Available in a wide range of sizes from minimum and medium to large.
• These on-off switchable magnetic holder bases meet various application.
Usable as a tacking base for equipment, and/or a measuring base for laser use (by installing jigs in the screw holes or, if necessary, with slight additional machining).Features:• Compact in size, yet it delivers a strong magnetic force.
• Either a V-slot and/or flat attractive face is provided. The face opposite to the change-over switch face is also attractive. (MB-PH, MB-PM and MB-PS excluded)
• Although screw holes are provided, some working is possible as shown.
KANETEC Magnetic Holder KM
Application:• Can be used to hold down drawings, rules and paper patterns.
• The models with tapped holes on the back can be used widely by installing them on jigs.
• Can be incorporated in press dies.
• Can hold workpieces during wire cutting.Features:• Four specifications, OD tolerance, plating, painting and peripheral knurling, are available for selection according to applications.
• When suitable OD “h” tolerances are selected, they can be incorporated in dies.
• When tapped holes are made on the back, they can be used in various applications.
KANETEC Magnetic Hanger KOC
Application:• Powerful magnetic hangerholder most suitable for cable arrangement and provisional wiring work on sites. Applicable to a wide range of uses as a hanger, since it powerfully attaches sheets, steel lockers, refrigerators, etc.
AutomotiveTools AT-4808 Inner Tie Rod Tool Set
These tools are specially designed for the inner tie rods that are inaccessible to adjust. The long socket can be easily used with seven open-jaw drivers, size 1-3/16”, 1-1/4”, 1-5/16”, 1-7/16”, 14mm, 17mm and 33.6mm, to most application. The inner tie rod can be easily removed and installed by slipping the long socket over the tie rod end and connecting it to the open-jaw driver.
Automotive Tools – AT-09 Valve Spring Compressor Set
- These tools are designed to compress and release valve springs. After removal of collects, pantograph-type
levers ensure a consistent coaxial contact with the valve. They work efficiently on all automobiles, trucks and
Automotive Tools – AT-0914 Master Ball Joint Adapter Set
- A complete ball joint adapter set
- Includes all the receive tubes and removing/installing adapters needed to work on most GM, Ford and Dodge two and four-wheel drive pickups,vans and sport utility Vehicles through 2002. Application chart included
- Works on press-fit upper and lower ball joints
- Set also includes a live center forcing screw plug
Part Number: GT-AT-0914
Part Name: Master Ball Joint Adapter Set
Brand: Genius Tools